Detaily produktu
SMA Male Right Angle to TNC Male Right Angle Cable Using RG316-DS Coax with HeatShrink
Číslo dílu (MPN)
Impedance
50 Ohm
Rozhraní
TNC
zakázková RF kabelová sestava z výkresu pro produkční sourcing
zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď. ⌄
- • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
- • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
- • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.
Obrázek
Kliknutím zvětšíte.
Specifications
| Rozhraní | Cable Assemblies |
|---|---|
| Rozhraní | RG316-DS |
| Rozhraní | TNC |
| Rozhraní | SMA |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Pohlaví | Male |
| Pohlaví | Male |
| Orientace | Right Angle |
| Orientace | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Typ kabelu | RG316-DS |
| Category | Cable Assemblies |
Popis
Aktuální referenční data pro PE34312-HS: TNC · 50 Ohm · Right Angle. Katalog uvádí konfiguraci jako: Right Angle. Impedance je uvedena jako 50 Ohm. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Pokud zde montáž chybí, potvrďte ji z výkresu nebo požadavku na protikus. Materiál je uveden jako Brass. Pomáhá při kontrole, ale nenahrazuje potvrzení celé konstrukce projektu. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.
Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.
Podobné konektory
Mohly by vás zajímat také tyto modely:
095-902-501-300
RF kabel sestavy RP SMA Bkhd Jck do AMC4 Plg 300 mm
LCCA30012-FT3
L-com low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30012-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and right angle SMA connection on the other. This low loss SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30012-FT3 can also be known as low loss SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30012-FT3 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to SMA right angle male cables are located on the LCCA30012-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 3 FT.
LCCA30499-FT1.5
L-com SMA female to TNC female bulkhead cable assembly using LC141TBJ coax, 1.5 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30499-FT1.5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and TNC bulkhead connection on the other. This SMA to TNC cable from L-com has a female to female gender combination. Our SMA female to TNC female coaxial assembly part number LCCA30499-FT1.5 can also be known as SMA jack to TNC jack cable assembly when using alternate gender names. SMA jack to TNC jack cable assembly LCCA30499-FT1.5 is manufactured with a formable coax.Maximum frequency for these SMA to TNC F/F cables is 6 GHz. Technical performance specifications on these 6 GHz SMA female to TNC female bulkhead cables are located on the LCCA30499-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female bulkhead to SMA female cable assembly because it can be used in the opposite direction.SMA female to TNC female bulkhead cable assembly using LC141TBJ coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA female to TNC female bulkhead cable assembly using LC141TBJ coax, 1.5 FT.
SMA864AE-0000
SMA zásuvka SQ 12.7 mm 4 hole flange s pájení cup kontakt 18 GHz VSWR1.2
095-902-588-400
MHF I LK Right Angle Plug to RP-SMA Straight Jack Bulkhead Rear Mount 1.13 mm 50 Ohm 400 mm
SMA864LEB-0000
SMA zásuvka SQ 12.7 mm 4 hole flange s round kontakt (Φ1.27L=15.2), PTFE L=7.3 18 GHz VSWR1.2
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu. ⌄
Vyloučení odpovědnosti
Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Cstone Technology je čínský exportní partner pro kompatibilní alternativy a není propojena s původními značkami. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.