CSTONE
Seznam RFQ

Detaily produktu

L-com's LCCA30348-FT6 is a low loss 7/16 DIN male to N female cable assembly using LMR-600-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30348-FT6 L-com Low Loss 7/16 DIN Male to N Female Cable Assembly using LMR-600-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Kompatibilní alternativa z Číny — shodu potvrzujeme podle výkresu/specifikace.

Číslo dílu (MPN)

LCCA30348-FT6

Impedance

50 Ohm

Rozhraní

7/16 DIN

zakázková RF kabelová sestava z výkresu pro produkční sourcing

zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.

RF kabel podle výkresu →
WhatsApp — Rychlá odpověď
Termín: 3–6 týd. | MOQ: 200+ ks
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď.
  • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
  • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
  • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.

Obrázek

Kliknutím zvětšíte.

Obrázek produktu

LCCA30348-FT6 product photo

LCCA30348-FT6 product photo

Specifications

Specifications for LCCA30348-FT6
RozhraníCoaxial Cable Assemblies
RozhraníLMR-600-DB
Rozhraní7/16 DIN
RozhraníN
Impedance50 Ohm
Impedance50 Ohm
Impedance50 Ohm
PohlavíMale
PohlavíFemale
OrientaceStraight
OrientaceStraight
Connector 1 Body MaterialBrass
Show 5 more specs
Connector 1 Body PlatingTri-Metal
Connector 1 PolarityStandard
Connector 2 PolarityStandard
Typ kabeluLMR-600-DB
CategoryCoaxial Cable Assemblies

Popis

Aktuální referenční data pro LCCA30348-FT6: 7/16 DIN · 50 Ohm · Straight. Katalog uvádí konfiguraci jako: Straight. Impedance je uvedena jako 50 Ohm. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Pokud zde montáž chybí, potvrďte ji z výkresu nebo požadavku na protikus. Materiál je uveden jako Brass. Pomáhá při kontrole, ale nenahrazuje potvrzení celé konstrukce projektu. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.

Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.

Podobné konektory

Mohly by vás zajímat také tyto modely:

PE36172LF

7/16 DIN Male to N Male Cable Using RG218 Coax , LF Solder

Zobrazit detaily →

LC3MP2414-48

The L-com LC3MP2414-48 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible 30-02001-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.8-inch long TRB 3-slot to TRB 3-lug cable that operates at 400 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MP2414-48 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02001-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.

Zobrazit detaily →

LCCN310-06581

The L-com LCCN310-06581 is a TRB jack connector with ground lug and twinax connectivity. This is the most popular TRB jack connector used in bus couplers, avionics control boxes, and bus relays. The TRB connector has a three-lug bayonet coupling with a robust design and is easy to use. This LCCN310-06581 from L-com is a solder pot 3-lug female front mount connector with grounding lug that is RoHS compliant. The TRB bulkhead jack is suitable for applications such as aircraft avionics, test labs, the military/aero avionics market, and the avionics test market. L-com has one of the largest in-stock selections of TRB jack connector with grounding lugs for same-day shipment. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect TRB connector for your requirements.

Zobrazit detaily →

7/16-BR-M3

The 7/16-BR-M3 is an 7/16 DIN Receptacle. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, and has a rated voltage of AC 2.7kV max. at 50Hz, ensures a high insulation resistance (10GΩ(Min.) at DC 500V), a low contact resistance (0.4 mΩ(Max.), and an excellent V.S.W.R 1.1(Max.) at DC~6GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Silver Plating, while the body is Brass/Silver Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.

Zobrazit detaily →

22510064

Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.

Zobrazit detaily →

22512085

Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.

Zobrazit detaily →
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu.

Podporuje přesnou, prefixovou i částečnou shodu.

Vyloučení odpovědnosti

Cstone je profesionální továrna, nikoli obchodní společnost, na RF a koaxiální konektory, adaptéry a kabelové sestavy včetně N-type, BNC, SMA, SMP, SSMB a MMCX. Konektory vyrábíme podle 2D výkresů nebo vzorků; vhodnost, MOQ, dodací lhůtu a výrobní detaily potvrzujeme přes RFQ. Cstone Technology není spojena s původními značkami. Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.