CSTONE
Seznam RFQ

Detaily produktu

TRB 3-Slot Straight Plug Bulkhead 78 Ohm

Kompatibilní alternativa z Číny — shodu potvrzujeme podle výkresu/specifikace.

Číslo dílu (MPN)

LC3MSA00548-12

Impedance

78 Ohm

Rozhraní

TRB 3-Slot

zakázková RF kabelová sestava z výkresu pro produkční sourcing

zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.

RF kabel podle výkresu →
WhatsApp — Rychlá odpověď
Termín: 3–6 týd. | MOQ: 200+ ks
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď.
  • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
  • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
  • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.

Obrázek

Kliknutím zvětšíte.

Obrázek produktu

LC3MSA00548-12 product photo

LC3MSA00548-12 product photo

Specifications

Specifications for LC3MSA00548-12
RozhraníCoaxial Cable Assemblies
Rozhraní30-02001-LC
RozhraníTRB 3-Slot
RozhraníTRB 3-Lug
Impedance78 Ohm
Impedance78 Ohm
Impedance78 Ohm
PohlavíPlug
PohlavíJack
OrientaceStraight
OrientaceStraight
Connector 1 Body MaterialBrass
Show 7 more specs
Connector 1 Body PlatingNickel
Connector 1 PolarityStandard
Connector 2 PolarityStandard
MontážBulkhead
Typ kabelu30-02001-LC
Length, Max12 inches
CategoryCoaxial Cable Assemblies

Popis

Aktuální referenční data pro LC3MSA00548-12: TRB 3-Slot · 78 Ohm · Bulkhead. Katalog uvádí konfiguraci jako: Straight. Impedance je uvedena jako 78 Ohm. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Montáž je uvedena jako Bulkhead. Pokud jsou důležitá omezení panelu, průchodky nebo příruby, pošlete rozměry s RFQ. Materiál je uveden jako Brass. Pomáhá při kontrole, ale nenahrazuje potvrzení celé konstrukce projektu. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.

Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.

Podobné konektory

Mohly by vás zajímat také tyto modely:

84012313

HUBER+SUHNER N connectors perform to a maximum frequency of up to 18 GHz, depending on the connector and cable type.

Zobrazit detaily →

7700-12341-1501000

Circular DIN konektory M12 samice 90 s kabel, TPE 4x18AWG ye UL / CSA, ITC / PLTC 10m

Zobrazit detaily →

MD-40FC

DIN konektory mini-DIN, 4P zástrčka, rt, Průchozí otvor, full shield s ferrite filter

Zobrazit detaily →

TC-402-4195M-LP

4.1/9.5 Mini DIN Male Low PIM Connector Solder Attachment for TFT-5G-402

Zobrazit detaily →

LC3MSA00440-12

The L-com LC3MSA00440-12 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible M17-176-00002-LC twinax. Our 78 Ohm cable assembly is available with a PFA jacket and a copper inner conductor with silver plating. We offer a blue, 0.8-inch long TRB 3-slot to TRB 3-lug cable that operates at 10 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00440-12 MIL-STD-1553 flexible RF cable assembly is available with PTFE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible M17-176-00002-LC twinax cable operates between -55 and 200 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.

Zobrazit detaily →

LCCA30339-FT1

L-com's LCCA30339-FT1 is a low loss 4.3-10 male to N male right angle cable assembly using LMR-600 coax, 1 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30339-FT1 L-com Low Loss 4.3-10 Male to N Male Right Angle Cable Assembly using LMR-600 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Zobrazit detaily →
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu.

Podporuje přesnou, prefixovou i částečnou shodu.

Vyloučení odpovědnosti

Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Cstone Technology je čínský exportní partner pro kompatibilní alternativy a není propojena s původními značkami. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.