Detaily produktu
The 3.5-A-PJ is an 3.5mm adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 26.5GHz, and has a rated voltage of AC 335V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (Between inner conductors: 3 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at DC~26.5GHz. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
Číslo dílu (MPN)
zakázková RF kabelová sestava z výkresu pro produkční sourcing
zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď. ⌄
- • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
- • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
- • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.
Obrázek
Kliknutím zvětšíte.
Specifications
| Rozhraní | 3.5mm Adaptor |
|---|---|
| Krytí IP | {'text': "The 3.5-A-PJ is an 3.5mm adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 26.5GHz, and has a rated voltage of AC 335V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (Between inner conductors: 3 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at DC~26.5GHz. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items."} |
| Specifications | {'Connector Gender': 'Plug-Jack', 'Impedance (Ohms)': '50Ω', 'Rated Voltage AC': 'AC 335V', 'Operating Frequency Range': '26.5GHz', 'Insulation Resistance': '5000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': 'Between inner conductors: 3 mΩ(Max.), between outer conductors: 2.5 mΩ(Max.)', 'V.S.W.R': '1.2(Max.) at DC~26.5GHz'} |
| Material/Plating/Attachment | {'Contact': 'Beryllium Copper/Gold Plating', 'Body': 'Stainless/Passivate Treatment'} |
| Category | 3.5mm Adaptor |
| Product Features | 50Ω; Adaptor; Products in stock; RoHS2 |
Popis
Pro 3.5-A-PJ je uvedeno referenční MPN; konečné potvrzení závisí na výkresu, specifikaci nebo BOM. Pokud zde montáž chybí, potvrďte ji z výkresu nebo požadavku na protikus. Materiál je uveden jako {'Contact': 'Beryllium Copper/Gold Plating', 'Body': 'Stainless/Passivate Treatment'}. Pomáhá při kontrole, ale nenahrazuje potvrzení celé konstrukce projektu. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.
Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.
Podobné konektory
Mohly by vás zajímat také tyto modely:
LCCA30192-FT1
L-com's LCCA30192-FT1 is a low loss N male right angle to N male cable assembly using LMR-400 coax, 1 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30192-FT1 L-com Low Loss N Male Right Angle to N Male Cable Assembly using LMR-400 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
7000-13545-9710050
Circular DIN konektory M12 samice FLANGE zástrčka A CODED REAR montáž, PP-wires 4X0.34 0.5m
L717DAF15PC
Standardní D-Sub konektory D-SUB, Machined signal 7.5A, Pravý úhel PCB Průchozí otvor, FP=8.10 mm, Cnt Tail 1.02 mm, 15 pin, Bright cín Shell+Grounding Dimples, Flash zlato, Float montáž, bez Bracket a Boardlock
22510043
Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.
FMCA2560
Outdoor Rated Low PIM RA 7/16 DIN Male to N Female Bulkhead Cable SPO-250 Coax in 7 Inch Using Times Microwave Parts
L777RRB25PVF
Standardní D-Sub konektory D-SUB, rovný, Std hustota, krimpování a Poke, Bright cín Shell+Grounding Dimplesl, 25 pin, 4-40 Fixed Front Screwlock
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu. ⌄
Vyloučení odpovědnosti
Cstone je profesionální továrna, nikoli obchodní společnost, na RF a koaxiální konektory, adaptéry a kabelové sestavy včetně N-type, BNC, SMA, SMP, SSMB a MMCX. Konektory vyrábíme podle 2D výkresů nebo vzorků; vhodnost, MOQ, dodací lhůtu a výrobní detaily potvrzujeme přes RFQ. Cstone Technology není spojena s původními značkami. Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.