Detaily produktu
RP-SMA PCB Průchozí otvor Pravý úhel zásuvka Bulkhead 50 Ω
Číslo dílu (MPN)
Impedance
50
Frekvence
12.4
zakázková RF kabelová sestava z výkresu pro produkční sourcing
zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď. ⌄
- • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
- • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
- • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.
Obrázek
Kliknutím zvětšíte.
Specifications
| Impedance | 50 |
|---|---|
| Povrch těla | Zlato |
| Materiál těla | Mosaz |
| kabel typ (Terminates do) | Nevztahuje se |
| Povrch kontaktu | Zlato |
| Materiál kontaktu | Mosaz |
| Ukončení kontaktu | Pájení |
| Spojovací mechanismus | Závitové |
| Číslo klasifikace kontroly exportu | EAR99 |
| Frekvence (max) | 12.4 |
| Pohlaví | Zásuvka |
| Krytí IP | Nehodnoceno |
Show 13 more specs
| Materiál izolátoru | PTFE |
|---|---|
| Izolované | Ne |
| Low PIM | Ne |
| MIL kvalifikace | Bez MIL kvalifikace |
| Nemagnetické | Ne |
| Orientace | Pravý úhel |
| Montáž | Bulkhead - Rear montáž |
| Porty | 1 (Single Port) |
| Velikostní kategorie | Subminiature |
| Teplota (Max °C) | 165 |
| Teplota (Min °C) | -65 |
| Styl zakončení | PCB - Průchozí otvor |
| Směr závitu | standardní |
Popis
Aktuální referenční data pro 132203RP: 50 · 12.4 · Bulkhead - Rear montáž. Impedance je uvedena jako 50. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Frekvence je uvedena jako 12.4. Skutečný provozní limit stále závisí na sestavě, protikusu a kontextu použití. U vysokofrekvenčních projektů přiložte výkres, trasu kabelu a kritické požadavky už v prvním RFQ. Montáž je uvedena jako Bulkhead - Rear montáž. Pokud jsou důležitá omezení panelu, průchodky nebo příruby, pošlete rozměry s RFQ. Katalog také uvádí hodnotu těsnění nebo ochrany Nehodnoceno. Porovnejte ji se skutečným prostředím v RFQ. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.
Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.
Podobné konektory
Mohly by vás zajímat také tyto modely:
Telegartner: R-SMA Bulkhead Jack Crimp G01
Telegartner: R-SMA Bulkhead Jack Crimp G01, 50 Ohm, solder/crimp, C4005, Z27, G01 (RG-58 C/U) (packed per 5)
SMA-1055-56-000-02
RF konektory / Koaxiální konektory SMA samec CN
LCCA30610-FT1
L-com SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30610-FT1 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle SMA connection on one end and right angle N connection on the other. This right angle SMA to right angle N cable from L-com has a male to male gender combination. Our SMA male to N male coaxial assembly part number LCCA30610-FT1 can also be known as right angle SMA plug to right angle N plug cable assembly when using alternate gender names. SMA plug to N plug cable assembly LCCA30610-FT1 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/M cables is 10 GHz. Technical performance specifications on these 10 GHz SMA right angle male to N right angle male cables are located on the LCCA30610-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle N male to right angle SMA male cable assembly because it can be used in the opposite direction.SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to right angle N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink.
2912-60950
RF konektory / Koaxiální konektory SMA
LCCA30156-FT4
L-com low loss SMA male to SMA male with times connectors cable assembly using LMR-195 coax, 4 FT with Times Microwave components is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30156-FT4 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and SMA connection on the other. This low loss SMA to SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30156-FT4 can also be known as low loss SMA plug to SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30156-FT4 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LMR-195 coax and are double shielded. L-com double shielded low loss SMA male to SMA male with times connectors cable assembly using LMR-195 coax, 4 FT with Times Microwave components is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz SMA male to SMA male cables are located on the LCCA30156-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day.Low loss SMA male to SMA male with times connectors cable assembly using LMR-195 coax, 4 FT with Times Microwave components is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male with times connectors cable assembly using LMR-195 coax, 4 FT with Times Microwave components.
ADS-PC7SA3
7 mm do SSMA zástrčka 18 GHz VSWR1.15
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu. ⌄
Vyloučení odpovědnosti
Cstone je profesionální továrna, nikoli obchodní společnost, na RF a koaxiální konektory, adaptéry a kabelové sestavy včetně N-type, BNC, SMA, SMP, SSMB a MMCX. Konektory vyrábíme podle 2D výkresů nebo vzorků; vhodnost, MOQ, dodací lhůtu a výrobní detaily potvrzujeme přes RFQ. Cstone Technology není spojena s původními značkami. Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.