CSTONE
قائمة RFQ

تفاصيل المنتج

Precision N Male to SMA Female Adapter

بديل متوافق من التوريد الصيني — نؤكد الملاءمة وفق الرسم أو المواصفة.

رقم الجزء (MPN)

PE91339

المعاوقة

50 Ohm

التردد

DC

الواجهة

N

كابل RF مخصص من الرسم لتوريد الإنتاج

كابل RF مخصص من الرسم موجه للإنتاج مع مراجعة توافق، إرشاد MOQ، ودعم توريد لخفض التكلفة.

كابل RF مخصص حسب الرسم →
WhatsApp — رد سريع
المهلة: 3–6 أسابيع | MOQ: 200+ قطعة
ما يجب تحضيره قبل RFQ البيانات الواضحة تقلل التخمين وتسرّع الحصول على إجابة مفيدة.
  • شارك MPN المرجعي أو القطعة الموصلة أو العلامة التجارية المصدر إذا كانت مهمة للمراجعة.
  • أضف BOM وتوزيع الكميات والطلب السنوي إذا تجاوز المشروع حجم النموذج الأولي.
  • أرفق الرسم أو ورقة البيانات أو المتطلبات الحرجة للمعاوقة والتردد والتركيب والطلاء.

الصورة

انقر للتكبير.

صورة المنتج

PE91339 product photo

PE91339 product photo

1 / 2

Specifications

Specifications for PE91339
الواجهةAdapters
الواجهةN
الواجهةSMA
المعاوقة50 Ohm
المعاوقة50 Ohm
التردد (الحد الأقصى)DC
التردد (الحد الأقصى)18 GHz
نوع الموصلMale
نوع الموصلFemale
Adapter Body StyleStraight
Connector Body Material 1Passivated Stainless Steel
Connector Body Material 2Passivated Stainless Steel
Show 5 more specs
Connector Polarity 1Standard
Connector Polarity 2Standard
طريقة التركيبNone
طريقة التركيبNone
CategoryAdapters

الوصف

البيانات المرجعية الحالية لـ PE91339: N · 50 Ohm · DC. المعاوقة مدرجة كـ 50 Ohm. إذا كان هذا العامل حرجًا، فأكده مرة أخرى في RFQ. التردد مدرج كـ DC. الحد التشغيلي الفعلي يعتمد على التجميع وقطعة التزاوج وسياق الاستخدام. إذا لم تظهر طريقة التركيب هنا، فأكدها من الرسم أو متطلبات التزاوج. المادة مدرجة كـ Passivated Stainless Steel. يفيد ذلك في المراجعة، لكنه لا يغني عن تأكيد بنية المشروع كاملة. استخدم هذه الصفحة للفرز قبل RFQ، وليس كاعتماد نهائي.

استخدم هذه الصفحة للفرز قبل RFQ. يتم تأكيد مسار التوريد والتخصيص MOQ 200+ بعد مراجعة الرسم/المواصفة/BOM.

موصلات مشابهة

قد تهمك أيضًا هذه النماذج:

CON-SMA-EDGE-SRP

RF موصلات محوري موصلات SMA أنثى PCB Edge تركيب Rev القطبية

عرض التفاصيل →

LCCA30235-FT10

L-com's LCCA30235-FT10 is a low loss SMA male to reverse polarity TNC female cable assembly using LMR-200 coax, 10 FT with Times Microwave components and ships same-day. The LMR-200 coax of this SMA cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to female gender configuration with flexible LMR-200 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30235-FT10 L-com Low Loss SMA Male to Reverse Polarity TNC Female Cable Assembly using LMR-200 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

عرض التفاصيل →

FMCN1885

Reverse Polarity SMA Female Connector Crimp/Solder Attachment for RG188-DS, RG316-DS

عرض التفاصيل →

225532-9

موصلات RF / موصلات محورية SMA قابس RG-141 141A

عرض التفاصيل →

SMAJ-58A(Ni)

The SMAJ-58A(Ni) is an SMA Straight Jack connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits RG-58/U,RG-58A/U cables. It features a impedance 50Ω, operates up to 1GHz, and has a rated voltage of AC 335V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.3(Max.) at DC~1GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating/Soldering, while the body is Brass/Nickel Plating/Crimp.A crimping toolTA-34 or TA-35 is required for mounting. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide.

عرض التفاصيل →

CAB.W10

RF كابل تجميعات CAB.W10 NMO Magnet تركيب إلى 17ft RG-58 إلى SMA(M) مستقيم قابس

عرض التفاصيل →
بحث MPN يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية.

يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية.

إخلاء المسؤولية

تُستخدم أسماء الشركات المصنعة والعلامات التجارية والرموز وأرقام القطع لأغراض التعريف والمرجعية التبادلية فقط. Cstone Technology هي شريك توريد تصدير مقره الصين لبدائل متوافقة وليست تابعة للعلامات التجارية الأصلية. تظل العلامات التجارية ملكًا لأصحابها المعنيين. يتم تأكيد الملاءمة النهائية من خلال مراجعة الرسم/المواصفات أثناء طلب عرض الأسعار.