تفاصيل المنتج
The K292-R2-S0.3 is an 2.92mm K Receptacle For Printed Circuit Board connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 40 GHz. The contact is made of Beryllium Copper, while the body is Stainless steel. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
رقم الجزء (MPN)
كابل RF مخصص من الرسم لتوريد الإنتاج
كابل RF مخصص من الرسم موجه للإنتاج مع مراجعة توافق، إرشاد MOQ، ودعم توريد لخفض التكلفة.
ما يجب تحضيره قبل RFQ البيانات الواضحة تقلل التخمين وتسرّع الحصول على إجابة مفيدة. ⌄
- • شارك MPN المرجعي أو القطعة الموصلة أو العلامة التجارية المصدر إذا كانت مهمة للمراجعة.
- • أضف BOM وتوزيع الكميات والطلب السنوي إذا تجاوز المشروع حجم النموذج الأولي.
- • أرفق الرسم أو ورقة البيانات أو المتطلبات الحرجة للمعاوقة والتردد والتركيب والطلاء.
الصورة
انقر للتكبير.
Specifications
| الواجهة | 2.92mm K Receptacle(PCB) |
|---|---|
| تصنيف IP | {'text': "The K292-R2-S0.3 is an 2.92mm K Receptacle For Printed Circuit Board connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 40 GHz. The contact is made of Beryllium Copper, while the body is Stainless steel. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items."} |
| Specifications | {'Connector Gender': 'Jack', 'Impedance (Ohms)': '50Ω', 'Operating Frequency Range': '40 GHz', 'V.S.W.R': '1.25(Max.) at DC~40GHz'} |
| Material/Plating/Attachment | {'Contact': 'Beryllium Copper', 'Body': 'Stainless Steel'} |
| Category | 2.92mm K Receptacle(PCB) |
| Product Features | 50Ω; Products in stock; Receptacle(PCB); RoHS2 |
الوصف
يوجد MPN مرجعي لـ K292-R2-S0.3. يتطلب التأكيد النهائي الرسم أو المواصفة أو BOM. إذا لم تظهر طريقة التركيب هنا، فأكدها من الرسم أو متطلبات التزاوج. المادة مدرجة كـ {'Contact': 'Beryllium Copper', 'Body': 'Stainless Steel'}. يفيد ذلك في المراجعة، لكنه لا يغني عن تأكيد بنية المشروع كاملة. استخدم هذه الصفحة للفرز قبل RFQ، وليس كاعتماد نهائي.
استخدم هذه الصفحة للفرز قبل RFQ. يتم تأكيد مسار التوريد والتخصيص MOQ 200+ بعد مراجعة الرسم/المواصفة/BOM.
موصلات مشابهة
قد تهمك أيضًا هذه النماذج:
L717SDEH09POL2VF
موصلات D-Sub القياسية D-SUB, Stamped Signal 3A, مستقيم PCB ثقب نافذ, Back Insulator Plus Back Shell Height 6.0 mm, 9 سن, Flash ذهب, Bright قصدير Shell+Grounding Dimples, 4-40 Removable Front Screwlock, بدون Standoff و Boardlock
LCCA30338-FT4
L-com's LCCA30338-FT4 is a low loss 4.3-10 male to N male cable assembly using LMR-600 coax, 4 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30338-FT4 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-600 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
557E113M432B
أغطية خلفية D-Sub SOLID BANDING BKSHLL END BAND SUPPLIED
C091 31K006 100 2
Circular DIN موصلات ذكر 6 سن زاوية قائمة كابل
LCCA30265-FT6
L-com's LCCA30265-FT6 is a low loss 4.3-10 male to N male cable assembly using LMR-240 coax, 6 FT with Times Microwave components and ships same-day. The LMR-240 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30265-FT6 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-240 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L17HTNEP4F4R
موصلات D-Sub القياسية D-SUB, Stamped Signal 3A, زاوية قائمة PCB ثقب نافذ, عالٍ Temp Std الكثافة, FP=8.08 mm (.318in), 09 سن, Bright قصدير Shell+Grounding Dimples, 0.76 m (30 in) ذهب, 4-40 Removable Front Screwlock, Ground Tab و Boardlock, Tape و Reel, Closed Back
بحث MPN يدعم المطابقة التامة، والبادئة، والمطابقة الجزئية. ⌄
إخلاء المسؤولية
Cstone مصنع متخصص، وليس شركة تجارة، لموصلات RF والمحورية والمهايئات وتجميعات الكابلات، بما في ذلك N-type وBNC وSMA وSMP وSSMB وMMCX. نصنع الموصلات حسب رسومات 2D أو العينات، ونؤكد الملاءمة وMOQ والمهلة وتفاصيل الإنتاج عبر RFQ. لا ترتبط Cstone Technology بالعلامات الأصلية. تُستخدم أسماء الشركات المصنعة والعلامات التجارية والرموز وأرقام القطع لأغراض التعريف والمرجعية التبادلية فقط. تظل العلامات التجارية ملكًا لأصحابها المعنيين. يتم تأكيد الملاءمة النهائية من خلال مراجعة الرسم/المواصفات أثناء طلب عرض الأسعار.